Supermicro SuperServer 5039MC-H12TRF

$4,910.00

Key Features

Dual Socket P (LGA 3647) support
2nd Gen. Intel® Xeon® Scalable
processors (Cascade Lake/Skylake)
12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz^† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
2 PCI-E 3.0 x16 (FHHL) slots,1 PCI-E 3.0 x8 (LP) slot,1 PCI-E 3.0 x16 for Add-on-Module, (Support SAS3 Storage controller), 1 PCI-E 3.0 x4 NVMe M.2 slot
8 or 10 Hot-swap 2.5″ SAS/SATA HDD bays (default 8 SATA3, 2 NVMe or SATA3)
2x 1Gbe LAN or 2x 10GBase-T LAN ports via Intel C622
2 USB 2.0, 1 VGA, 1 SuperDOM, TPM
2 SuperDOM (Disk on Module) ports
Upto 750W Redundant Power Supplies Platinum Level High-efficiency

Delivery

Clear

SKU: 5039MC-H12TRF Category: Servers

Description


Processor/Cache

CPU	Dual Socket P (LGA 3647) 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)^‡, Dual UPI up to 10.4GT/s Support CPU TDP 70-165W*
Cores	Up to 28 Cores
Note	* Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
Note	^‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors


System Memory

Memory Capacity	12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz^† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM^††
Memory Type	2933^†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	^† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro ^†† Cascade Lake only. Contact your Supermicro sales rep for more info.


On-Board Devices

Chipset	Intel® C622 chipset
SATA	SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers	Dual LAN with 10Gbase-T from C622
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video	ASPEED AST2500 BMC


Input / Output

SATA	8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports
LAN	2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port
USB	6 USB 3.0 ports (4 rear, 2 front via header)
Video	1 VGA port
DOM	2 SuperDOM (Disk on Module) ports


Management

Software	Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations	ACPI / APM Power Management


PC Health Monitoring

CPU	Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors


Front Panel

Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED


Expansion Slots

PCI-Express	2 PCI-E 3.0 x16 (FHHL) slots 1 PCI-E 3.0 x8 (LP) slot 1 PCI-E 3.0 x16 for Add-on-Module (AOM) 1 PCI-E 3.0 x4 NVMe M.2 slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)


Drive Bays

Hot-swap	8 SATA3 (6Gbps) ports and 2 NVMe/SATA3 hybrid ports (connected to onboard storage controller)


System Cooling

Fans	4 Counter-rotating 4cm PWM fans, 2 fans for AOC cooling


AC/DC240V Input Redundant Power Supply

700W/750W Redundant Power Supplies with PMBus
Total Output Power	700W/750W
Dimension (W x H x L)	54.5 x 40.25 x 320 mm
Input	100 – 140Vac / 8 – 6A / 50-60Hz 200 – 240Vac / 4.5 – 3.8A / 50-60Hz 200 – 240Vdc / 4.5 – 3.8A (CCC Only)
+12V	Max: 58A / Min: 0.5A (100 – 140Vac) Max: 62A / Min: 0.5A (200 – 240Vac) Max: 62A / Min: 0.5A (200 – 240Vdc) (CB/CCC Only)
+5V sb	Max: 3A / Min: 0A
Output Type	Gold Finger Connector Mating with Molex 45984-4343
Certification	Platinum Certified [ Test Report ]


Operating Environment

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)